Roller door Safe 4000
The Safe 4000 roller door is made of double-walled extruded aluminum profiles, which makes the door particularly stable and gives it a high ability to withstand strong winds. For this reason, the Safe 4000 roller door is especially used to close off larger facade openings, such as parking basements, garages, warehouses and the like.
Manufactured in accordance with EN13241:2003+A2:2016.
Approved according to old standard: F&P protection class Red.
Select type
Type PD 75
Extruded double-walled aluminum profiles: 75 x 16 mm.
Maximum dimensions: 7500 x 5000 mm.
Type PD 75 w. polycarbonate windows
Window cut-out with impact-resistant polycarbonate in size 80 x 35 mm.
Maximum dimensions: 7500 x 5000 mm.
Wind-resistant roller door that can withstand heavy winds
wind speed.
The Safe 4000 roller door is a very stable closure and can withstand wind forces up to strong storms.
The double-walled slats can be filled with foam elements to achieve a better K-value. However, there will always be thermal bridges at joints.
Door control for everyday use
The Safe 4000 roller door is equipped with a complete Nice NDCC 1001 type door controller. The control box is operated with a key switch, code keypad, timer or other devices with a potential-free signal.
Roller door Safe 4000 can be made with polycarbonate panes and with insulation
The double-walled slats can be made with Polystyrene insulation. Window cut-out with impact-resistant polycarbonate in size 80 x 35 mm.
Technical specifications
At Alux, we believe that a good collaboration leads to a good solution. We are always ready to advise you throughout your project or help you if you have any questions about our solutions.
Contact our service team at alux@alux.dk for non-binding advice and quotes.
-
Extruded double-walled aluminum profiles: 75 x 16 mm.
Approved according to old standard: F&P protection class Red.
-
Extruded double-walled aluminum profiles: 75 x 16 mm. Window cut-out with impact-resistant polycarbonate in size 80 x 35 mm.
Approved according to old standard: F&P protection class Red.
-
The double-walled slats can be filled with foam elements to achieve a better K-value. However, there will always be thermal bridges at joints.
Insulation with Polystyrene.
-
Width max 7500 mm.
Height max 5000 mm.
-
Extruded aluminum profiles with PVC noise reduction inserts and telfon wear parts at the top and additional telfon brackets.
Dimensions: F90: 90 x 41 mm.
-
Pre-reinforced bottom rail in extruded aluminum profile in size 95 x 57 mm.
-
Surface treatment aluminium parts come with a natural anodized surface as standard.
Can be powder coated in all RAL colors.
-
Operation As standard comes with box motor 400v, Nice RDF.
-
Control Complete door control type Nice NDCC 1001.
The control box is operated with a key switch, code keypad, timer or other devices with a potential-free signal.
-
- Roll-off protection.
- Bottom rail with terminal strip, with spiral cable or wireless.
- Safety photocell.
- Child safety photocell at the top.
- Emergency stop switch on control box.
-
- Cover box.
- UPS emergency power supply.
At 400 v, a frequency converter is required. This frequency converter also allows for soft start and stop, as well as driving speed adjustment.
-
See separate installation instructions.
-
- Annual statutory inspection by a service company.
- Functional testing of engine, steering and safety equipment.
- Check suspension, fasteners and slats for damage.
- Tightening of moving parts.
- Clean guide rails and lubricate bearings and sliding brackets if necessary.
-
We recommend purchasing a tailor-made service agreement to ensure that the annual statutory inspection, operation and maintenance is carried out.
Service agreements in all levels, you decide.
Ensure the lifespan of your products and prevent downtime with a service agreement
Related products
Safe 2000 roller door
Safe 2000 is a good seal made of foamed aluminum slats and is therefore suitable for smaller facade openings where less heat loss is desired or to keep temperatures down in cooler rooms.
Roller shutter door Safe 4000 Type 60/120
Safe 4000 Type 60/120 is an open mesh roller grille door in extruded aluminum profiles. Mesh size: 60 x 120 mm - approx. 47% open.
Roller shutter door Safe 4000 Type Keroll
Safe 4000 Type Keroll is an open mesh roller grille door in flat steel with hinged joints. Mesh size: 185 x 120 mm - approx. 78% open.