Safe 2000 roller door
Safe 2000 Roller Door is a good seal made of foamed aluminum slats and is therefore suitable for areas where less heat loss is desired or by keeping the temperature down in cooler rooms. Examples include stalls, fruit and vegetable departments in supermarkets, garages, storage rooms, etc.
Product standard: EN13241-1.
Downloads:
Select type
Alulux Type CD 200 - for smaller openings
Roller door slats are made of foamed aluminum slats in size 55x14 mm with a maximum area of 12 m2.
Alulux Type CD 77 - for larger openings
Roller door slats are made of foamed aluminum slats in size 78.5x19 mm with a maximum area of 16 m2.
CD 200 is for smaller doorways
Roller door Type CD 200 is built with 55x14 mm slats and is suitable for closing off smaller doorways or smaller openings between rooms where you want to reduce heat loss or maintain a low temperature.
CD 77s for larger doorways
Roller door Type CD 77 is made with 78.5x19 mm slats, making it ideal for larger openings such as gates and garages.
CD 77s offer energy-saving performance, are weatherproof and, like the CD200, are particularly suitable for closing off larger doors and larger openings between rooms where you want to reduce heat loss or maintain a low temperature.
Insulation of green department, Meny Aarhus
Safe 2000 roller shutters are increasingly used in stores with produce departments, where a department needs to be kept cool when the store is closed. It's an elegant and neat solution that's easy to operate.
The green department in Meny Aarhus uses type CD 77.
Technical specifications
At Alux, we believe that a good collaboration leads to a good solution. We are always ready to advise you throughout your project or help you if you have any questions about our solutions.
Contact our service team at alux@alux.dk for non-binding advice and quotes.
Downloads:
-
Roller door slats are made of foamed aluminum slats in size 55x14 mm with a maximum area of 12 m2.
Maximum dimensions at widths up to 4400 mm
Width: 4400 mm x Height: 2400 mm.
Available with fixed brackets. Maximum dimensions for widths up to 3000 mm
Width: 3400 mm. x Height: 3000
-
Roller door slats are made of foamed aluminum slats in size 78.5x19 mm with a maximum area of 16 m2.
Maximum dimensions at widths up to 4400 mm
Width: 4400 mm x Height: 3200 mm. Available with fixed brackets.
Maximum dimensions at widths up to 5400 mm
Width: 5400 mm x Height: 2600 mm. Available with roller bearing brackets.
Maximum dimensions at widths up to 4400 mm
Width: 3200 mm x Height: 4500 mm. Available with roller bearing brackets.
-
Extruded aluminum profiles. Dimensions: See drawings at the bottom of the page.
-
Cover box is 2-piece roll-formed aluminum sheet, with lacquered surface. See surface treatment.
Cover box dimensions are 250, 300 or 360 mm depending on the height of the shutter. See table below.
-
Standard colors: White 01, light gray 02, brown 03, alu metallic 04, light beige 11, anthracite gray 80.
In addition to standard colors, guide rails, cover box and base profiles can be supplied in any RAL color at an additional cost.
-
The roller door is self-locking in the down position with fixed brackets. Roller doors with roller bearing brackets require manual locking.
-
Standard is a built-in 230V tube motor.
-
Standard with key switch without impulse signal. With impulse signal, the product must always be equipped with a security package. Remote control, connection to ABA systems, CTS systems, etc. can be added at an extra cost.
-
- Manual locking (anti-push lock).
- Roll-off protection.
- Safety package (Emergency stop, electrical terminal strip and photocell).
- Oops - emergency power supply.
- Plexiglass panes in slats.
- Air/light slot in lambswool.
-
See separate installation instructions.
-
- Functional testing of engine, steering and safety equipment.
- Check suspension, fasteners and slats for damage.
- Tightening of moving parts.
- Checking the self-locking effect.
- Inspect guide rails and lubricate bearings if necessary.
Operation and maintenance should be performed min. once a year for products without automation. For products with automation (impulse signal), annual inspection is required by law and must be performed by a certified service company.
-
We recommend purchasing a tailored service agreement to ensure that operation and maintenance is carried out. This reduces the risk of downtime and extends the lifetime of the product.
Target cover box
Standard colors
White 01 (RAL910), light gray 02 (RAL7038), brown 03 (RAL8014), alu metallic 04 (RAL9006), light beige 11, anthracite gray 80(RAL7016).
In addition to standard colors, guide rails, cover box and base profiles can be supplied in any RAL color at an additional cost.
Service agreements in all levels, you decide.
Ensure the lifespan of your products and prevent downtime with a service agreement
Related products
Roller door Safe 4000
The Safe 4000 roller door is made of double-walled extruded aluminum profiles, which makes the door particularly stable and gives it a high ability to withstand strong winds. Especially suitable for larger openings such as underground parking lots, garages and the like.
Roller shutter door Safe 4000 Type 60/120
Safe 4000 Type 60/120 is an open mesh roller grille door in extruded aluminum profiles. Mesh size: 60 x 120 mm - approx. 47% open.
Roller shutter door Safe 4000 Type Keroll
Safe 4000 Type Keroll is an open mesh roller grille door in flat steel with hinged joints. Mesh size: 185 x 120 mm - approx. 78% open.