Smoke curtain Fire 2000 Type RSV-210

Thanks to high-quality fiberglass, our RSV-210 smoke protection curtain reliably protects against smoke ingress in the event of a fire. The RSV -210 is standardized to EN 1634-3 and EN12101-1 and is therefore temperature resistant.

Tested according to European standard EN1634-3 and ASB 3, D120 according to EN12101-1.

Temperature resistant, non-flammable and absolutely smoke-proof

 

Deaths in fires are usually caused by smoke. Thanks to a high-quality glass fabric, our smoke protection curtain Fire 2000 Type RSV-210 reliably protects against smoke penetration in the event of a fire. The RSV -210 is standardized to DIN EN1634-3 and DIN EN12101-1 and is therefore temperature-resistant, non-combustible and absolutely smoke-tight.

Intuitive design

The functionality is kept simple. In the event of a fire, commands are relayed from the release unit to the smoke curtain via the motor control module. When triggered, the curtain unrolls according to the 'gravity-fail-save' principle and reliably secures room sections or buildings.

 

Customize the RSV-210 for any construction project

Integrating fire protection in an appealing way can be difficult. But our smoke curtain is designed to fit almost invisibly into the overall design. On request, it is possible to paint the smoke curtain individually. Thanks to a special powder coating process, the RSV -210 is available in almost all RAL, DB and special colors.

Suitable for airports, metro stations, public buildings, schools, industrial buildings, warehouses, universities, laboratories and more.

Technical specifications

At Alux, we believe that a good collaboration leads to a good solution. We are always ready to advise you throughout your project or help if you have any questions about our solutions.

Contact our service team at alux@alux.dk for non-binding advice and quotes.

 
 
 
 
 


  • Width 33,570 mm (double rolls)

    Height 6,000 mm.

  • Made of PU-coated non-combustible glass fabric that is A2 tested according to DIN 4102. Heat resistant up to 600 degrees for 120 minutes. Comes standard with a gray surface.

  • 100 x 50 mm.

  • Comes standard in RAL 7035, but can be delivered in any RAL color.

  • 24 V DC with FailSafe. FailSafe ensures automatic shutdown in the event of a signal or power failure.

  • Connects to ABA or ABDL systems.

  • Made of 1.2 mm sheet steel powder coated in RAL 7035.

  • Ceiling or wall mounting with approved mounting material.

    See separate installation instructions

  • Smoke curtains are not intended as a daily seal - only in connection with activation from ABA or ABDL systems.

  • - Annual statutory inspection by a service company.

    - Functional testing of engine, steering and safety equipment.

    - Check suspension, fasteners and slats for damage.

    - Tightening of moving parts.

    - Clean guide rails and lubricate bearings and sliding brackets if necessary.

  • We recommend purchasing a tailor-made service agreement that ensures that the annual statutory inspection is met, as well as operation

 

Alux are experts at solving the difficult tasks

 

If you need a different type of smoke curtain than the one we offer on this page, or if you have a fire protection task that requires something extra, contact Alux at 70262140 or alux@alux.dk to hear about the possibilities.

We have many years of experience with fire curtains and guarantee professional solutions. We provide the best products and service - including installation and cooperation with insurance companies, estimators, contractors, etc.

 

Related products

 
 

Fire curtain Fire 4000 Type RGT EW 60

Fire 4000 fire curtains are made of strong and non-combustible PU coated Wearflex fabric, which is fixed to the guide rails on both sides via sewn-in steel rods. They are secured against pull-out in the guide rails to prevent breakdown in the event of fire and flue gas loads.

See more about Fire 4000 Fire Curtain Type RGT EW 60

Fire Curtain Fire 5000 Type RGT EI260 & RGT EI2120

A heat-insulating fire protection that reduces heat radiation to a minimum. The temperature on the surface of the fire curtain can be kept lower than 140° for a minimum of 30 minutes. The compact and solid design of the fire curtain can be easily integrated into both ceilings and frames.

See more about Fire 5000 Fire Curtain Type RGT EI260 & RGT EI2120

Fire shutter Fire 4000 Type RGS EW 60, RGS EW 90 & RGS EW120

This Fire 4000 Fire shutter is an excellent solution for fireproof closing or dividing rooms. This Fire shutter is highly suitable for everyday use and situations where low to medium fire resistance is required.

See more about Fire shutter Fire 4000 Type RGS EW 60, RGS EW 90 & RGS EW120