Roller Shutter Safe Pro RC3
Roller Shutter Safe Pro RC3 is a strong security system with extruded aluminum profiles. The blind has fully enclosed profiles that block out views and airflow. Designed for a demanding security level, Roller Shutter Safe Pro RC3 Roller Shutter is particularly suitable for shopping centers and areas where complete closure is required.
Certified according to EN1627 RC3 - F&P sikringsniveau 50.
New Standard: EN1627 RC3
Heavy-duty and reinforced construction approved to withstand hydraulic pressure/pull of 600 kg.
Maximum dimensions: 4000 x 3200 mm.
Strong security for your business
Plaza Jewelry is secured with Safe 3000 Roller Shutter according to EN1627-30 RC3. A strong and elegant protection that lives up to F&P sikringsniveau 50.
Closed fuse designed for a demanding security level
With Roller Shutter Safe Pro RC3 you have many options for an elegant and closed security solution designed for a demanding security level. This Roller Shutter provides ample opportunity to meet the security level you need. For external installation, special acceptance from the insurance company is required if it is to be an approved solution.
Closed extruded aluminum profiles with a wide range of applications
Roller Shutter Safe Pro RC3 Roller Shutter can be integrated almost anywhere where a demanding level of security is needed and is particularly suitable for securing shops, outdoor areas and much more.
Safe 3000 Roller Shutter comes standard with a natural anodized surface, but is available in any RAL color at an additional cost.
Alux takes green responsibility with sustainable aluminum from Hydro.
At Alux, we have made a major change in our sourcing of aluminum, so we only supply the climate-friendly and sustainable Hydro Reduxa aluminum from Hydro.
Technical specifications
At Alux, we believe that a good collaboration leads to a good solution. We are always ready to advise you throughout your project or help you if you have any questions about our solutions.
Contact our service team at alux@alux.dk for non-binding advice and quotes.
Downloads:
Installation instructions (pdf)
-
Heavy-duty and reinforced construction approved to withstand hydraulic pressure/pull of 600 kg.
Venetian blind mat in extruded aluminum profiles 1.4 mm thick.
Maximum blind targets
Width: 4000 mm.
Height: 3200 mm.
-
Extruded aluminum profiles with noise reduction inserts and Teflon wear parts at the top.
Dimensions: F90 - 90 x 41 mm.
Dimensions: F70 - 70 x 41 mm (Not certified to new standard)
-
Louver mat, guide rails and other aluminum parts are as with natural anodized surface.
All parts can be powder coated in any RAL color at an additional cost.
-
Steel with painted surface for internal installation and galvanized surface for external installation.
-
The blind is self-locking in the down position.
-
Standard is a built-in 230V tube motor.
Note: For large heavy blinds and special solutions, other types of motors or control options may be available.
-
Standard with key switch without impulse signal. With impulse signal, the product must always be equipped with a security package. Remote control, connection to ABA systems, CTS systems, etc. can be added at an extra cost.
-
- Cover box for roller pipes.
- Retractable guide rails. (not RC certified)
- Removable guide rails. (not RC certified)
- Manual locking.
- Roll-off protection.
- Safety package (Emergency stop, electrical terminal strip and photocell).
- Oops - emergency power supply.
-
See separate installation instructions.
-
- Functional testing of engine, steering and safety equipment.
- Check suspension, fasteners and slats for damage.
- Tightening of moving parts - Checking the self-locking effect
- Inspect guide rails and lubricate bearings if necessary.
Operation and maintenance should be performed min. once a year for products without automation. For products with automation (impulse signal), annual inspections are required by law and must be performed by a certified service company.
-
We recommend purchasing a tailored service agreement to ensure that operation and maintenance is carried out. This reduces the risk of downtime and extends the lifetime of the product.
Related products
Rolling Grille Safe 2000
Safe 2000 is a good security system with roll-formed steel profiles. A neat and economical security solution that is especially useful where a high level of security is not required.
Roller Shutter Safe 3000
Safe 3000 is a strong security system with extruded aluminum profiles. The blind has fully enclosed profiles that close off viewing and airflow. Intended for a demanding security level where complete closure is required.
Fixed Grille Safe 3000 Type 100
Safe 3000 patented Fixed Grille in a unique design made of steel and aluminum that can be delivered in F&P protection class Blue or as EN 1627-30 RC3. Safe 3000's smart design has many applications.