Roller Shutter Safe Pro RC4
Roller Shutter Safe Pro RC4 is a very strong security system with extruded aluminum profiles. The shutter has closed profiles that block out views and airflow. Roller Shutter Safe Pro RC4 Roller Shutter is designed for a very demanding security level and is particularly suitable for museums, airports, jewelry stores and other applications with very high security requirements.
Certificeret efter EN 1627 i klasse RC4. F&P sikringsniveau 60.
EN 1627 RC4
Heavy-duty and reinforced construction approved to withstand hydraulic pressure/pull of 1000 kg.
Max bredde: 7200 mm.
Min bredde: 1000 mm
Max fri åbningshøjde: 4800 mm.
Min fri åbningshøjde: 1875 mm.
Maks. højde med SafeLock: 6000 mm.
Rullejalousi Safe Pro RC4 er certificeret efter EN 1627 i klasse RC4. Certifikat 6622, Bilag 1, angiver en testet bredde på 6000 mm og en testet fri åbningshøjde på 3700 mm.
Closed fuse designed for a very high level of protection
Safe 4000 Roller Shutter is designed for a very demanding level of security and is especially suitable for museums, airports, jewelry stores and other applications with high security requirements.
RC4 with heavy-duty and reinforced construction
Vi fremstiller, leverer og monterer rullejalousier certificeret efter EN 1627 i RC3, RC4 og RC5. Produkterne fremgår af Dancert certifikat 6622, Bilag 1. Certifikatets testede bredde i RC4 er 6000 mm, og produktbladets maksimale bredde er 7200 mm. En stor åbning kan derfor ofte sikres med ét jalousi i stedet for flere enheder.
RC4 test with 1000 kg pressure
The RC4 test consists of a hydraulic pressure test with a pressure of 1000 kg and manual break-in tests with a minimum break-in time of 10 minutes. In other words, it is a Roller Shutter with unique security and far stronger than the old standard F&P security class Red.
Complete security for the National Gallery of Denmark
The National Gallery of Denmark is secured at every turn with roller shutters, roller grilles and fixed grilles, and Alux has played a major role in this for many years. Different types of roller grilles and roller shutters have been supplied, adapted to the needs of each area.
Technical specifications
At Alux, we believe that a good collaboration leads to a good solution. We are always ready to advise you throughout your project or help you if you have any questions about our solutions.
Contact our service team at alux@alux.dk for non-binding advice and quotes.
Downloads:
Installation instructions (pdf)
-
Heavy-duty and reinforced construction approved to withstand hydraulic pressure/pull of 1000 kg.
Venetian blind mat in extruded aluminum profiles 2.0 mm thick.
Maximum blind targets
Width: 6000 mm.
Height: 3750 mm.
-
Extruded aluminum profiles with noise reduction inserts and Teflon wear parts at the top.
Dimensions: F90 - 90 x 41 mm.
-
The blind mat, guide rails and other aluminum parts have a natural anodized surface as standard.
All parts can be powder coated in any RAL color at an additional cost.
-
Steel with painted surface for internal installation and galvanized surface for external installation.
-
The blind is self-locking in the down position.
-
Standard is a built-in 230V tube motor.
Note: For large heavy grilles and special solutions, other types of motors or control options may be available.
-
Standard with key switch without impulse signal. With impulse signal, the product must always be equipped with a security package. Remote control, connection to ABA systems, CTS systems, etc. can be added at an extra cost.
-
- Cover box for roller pipes.
- Retractable guide rails. (not RC certified)
- Removable guide rails. (not RC certified)
- Manual locking.
- Roll-off protection.
- Safety package (Emergency stop, electrical terminal strip and photocell).
- Oops - emergency power supply.
-
See separate installation instructions.
-
- Functional testing of engine, steering and safety equipment.
- Check suspension, fasteners and slats for damage.
- Tightening of moving parts.
- Checking the self-locking effect.
- Inspect guide rails and lubricate bearings if necessary.
Operation and maintenance should be performed min. once a year for products without automation. For products with automation (impulse signal), annual inspection is required by law and must be performed by a certified service company.
-
We recommend purchasing a tailored service agreement to ensure that operation and maintenance is carried out. This reduces the risk of downtime and extends the lifetime of the product.
Related products
Roller Shutter Safe 3000
Safe 3000 is a strong security system with extruded aluminum profiles. The blind has fully enclosed profiles that close off viewing and airflow. Intended for a demanding security level where complete closure is required.
Rolling Grille Safe 3000 Type Screen
Rolling Grille Safe 3000 Type Screen is a strong barrier with extruded aluminum profiles. Type Screen has small perforations in the profiles that provide good transparency and allow air to enter between rooms.
Fixed Grille Safe 4000 Type 100/50
Fastgitter Safe 4000 Type 100/50 er udført med dobbelt stålgitternet og certificeret efter EN 1627 i klasse RC4.