Roller shutter door Safe 4000 Type 120/60
Safe 4000 roller grille doorType 120/60 made of extruded aluminum profiles with 60 mm slats and 120 mm spacing between slats. Type 120/60 is used for gates and other facade openings where you want a good stable enclosure with the possibility of ventilation. Especially for parking basements, garages and the like.
Manufactured in accordance with EN13241:2003+A2:2016.
Roller shutter door with an opening degree of approx. 47
The Safe 4000 Type 120/60 roller grille door is an open mesh roller grille door in flat steel with a mesh size of 120 x 60 mm. This gives an opening rate of approx. 47%.
Door control for everyday use
The Safe 4000 Type 120/60 roller shutter door is available in maximum dimensions of 7500 x 5000 mm and is equipped with a complete door control system type Nice NDCC 1001.
The control box is operated with a key switch, code keypad, timer or other devices with a potential-free signal.
Ensure the annual statutory inspection with an Alux service agreement
We recommend purchasing a tailor-made service agreement to ensure that the annual statutory inspection, operation and maintenance is carried out.
Annual inspection is required by law for all automatic roller doors.
Technical specifications
At Alux, we believe that a good collaboration leads to a good solution. We are always ready to advise you throughout your project or help you if you have any questions about our solutions.
Contact our service team at alux@alux.dk for non-binding advice and quotes.
-
Extruded aluminum profiles with vertical slats.
Maximum goals
Width max 7500 mm Height max 5000 mm
-
74 x 120 mm - approx. 47% open.
With 60 mm. slat. -
Extruded aluminum profiles with PVC noise reduction inserts and telfon wear parts in the top and additional telfon brackets.
Dimensions: F90: 90 x 41 mm
-
Reinforced bottom rail in extruded aluminum profile in size 95 x 57 mm.
-
Aluminum parts come with a natural anodized surface as standard.
Can be powder coated or anodized in other RAL colors. All steel parts are finished with a galvanized surface.
-
Roller tube and support roller tube Ø133. Galvanized design.
-
As standard comes with box motor 400v, Nice RDF. With emergency control - and crank handle.
-
Complete door controller type Nice NDCC 1001. The control box is operated with a key switch, code keypad, timer or other devices with a potential-free signal.
-
- Roll-off protection
- Bottom rail with terminal strip, with spiral cable or wireless.
- Safety photocell.
- Child safety photocell in top. (Only for grilles)
- Emergency stop switch on control box.
-
- Cover box.
- UPS emergency power supply.
At 400 v, a frequency converter is required. This frequency converter also allows for soft start and stop, as well as driving speed adjustment.
-
See separate installation instructions.
-
- Annual statutory inspection by a service company.
- Functional testing of engine, steering and safety equipment.
- Check suspension, fasteners and slats for damage.
- Tightening of moving parts.
- Clean guide rails and lubricate bearings and sliding brackets if necessary.
-
We recommend purchasing a tailor-made service agreement to ensure that the annual statutory inspection, operation and maintenance is carried out.
Service agreements in all levels, you decide.
Ensure the lifespan of your products and prevent downtime with a service agreement
Related products
Roller shutter door Safe 4000 Type Keroll
Safe 4000 Type Keroll is an open mesh roller grille door in flat steel with hinged joints. Mesh size: 185 x 120 mm - approx. 78% open.
Safe 2000 roller door
Safe 2000 is a good seal made of foamed aluminum slats and is therefore suitable for smaller facade openings where less heat loss is desired or to keep temperatures down in cooler rooms.
Roller door Safe 4000
The Safe 4000 roller door is made of double-walled extruded aluminum profiles, which makes the door particularly stable and gives it a high ability to withstand strong winds. Especially suitable for larger openings such as underground parking lots, garages and the like.