Fixed Grille Safe Pro RC4
Fastgitter Safe Pro RC4 er et fastgitter udført med dobbelt stålgitternet, så maskestørrelsen bliver 100 x 50 mm. Type 100/50 er et patenteret system, certificeret efter EN 1627 i klasse RC4.
Certificeret efter EN 1627 i klasse RC4. F&P sikringsniveau 60.
Fuse class
Fixed Grille Safe Pro RC4
Heavy-duty and reinforced construction approved to withstand hydraulic pressure/pull of 1000 kg.
Mesh size: 100 x 50 mm. Wire thickness: 10 mm. Mesh mat is removable.
Maximum width:
3000 mm
Maximum height: 1300 mm
- heights are always done with 100 mm increments.
Dobbelt stålgitternet, testet og godkendt efter EN 1627 i klasse RC4
Double mesh and reinforced locking hardware
Double mesh in special quality 10 mm bar steel, welded at all joints and fitted with an appropriate number of locking bushings. The double mesh is reinforced with additional locking brackets to prevent pull-out from the side rails. In addition, free steel ends are fitted with end caps made of gray plastic and the top and bottom are finished with an aluminum decorative rail.
Tested and approved according to RC4
Hos Alux laver vi udførlige hjemmetests af vores produkter for løbende at kunne forbedre dem.
EN 1627 er en krævende sikringsstandard. Safe 4000 fastgitter er testet efter RC4 med tryk/træk på 1000 kg.
Technical specifications
At Alux, we believe that a good collaboration leads to a good solution. We are always ready to advise you throughout your project or help you if you have any questions about our solutions.
Contact our service team at alux@alux.dk for non-binding advice and quotes.
Downloads:
Installation instructions RC4 (pdf)
-
Heavy-duty and reinforced construction approved to withstand hydraulic pressure/pull of 1000 kg.
Mesh size/thread thickness: 100 x 50 mm/10 mm. Mesh mat is removable.
-
Maximum width: 3000 mm Maximum height: 1300 mm - heights are always made with 100 mm increments.
-
25 kg/ m2.
-
Aluminum profiles that form a closed and lockable cassette. Width 50 mm. Extra reinforced side rails, lock boxes and locks.
-
Double mesh in special quality 10 mm bar steel, welded at all joints and fitted with an appropriate number of locking bushes.
The double mesh is reinforced with extra locking brackets to prevent pull-out from the side rails. In addition, free steel ends are fitted with end caps made of gray plastic, and the top and bottom are finished with an aluminum decorative rail.
-
Grating mats come standard with an electro-galvanized surface and with side profiles in natural anodized aluminium. Powder-coated finishes are available at an additional cost.
-
Grilles are installed with concealed screws in the cassette. For niche installation, the grilles are installed with auxiliary profiles, which can be made of aluminum profiles 50x50x4 mm.
Fixing/attachment must be carried out so that the grille complies with the pull-out requirement of min. 1000 kg. per side rail. For further information, see separate installation instructions for Fixed Grille Safe 4000 type 100/50 RC4.
Related products
Fixed Grille Safe 2000
Safe 2000 is a simple and economical Fixed Grille, made of steel. The grille is used where a simple security solution is required.
Fixed Grille Safe 3000 Type 100
Safe 3000 is a patented Fixed Grille with a unique design made of steel and aluminum. Type 100 has many different functions, e.g. as a swinging grille.
Fixed Grille Safe 4000 Type Elegance
Safe 4000 Type Elegance is a modern Fixed Grille, made of polycarbonate and aluminum. The grille is what we call an "invisible" security solution.