Fire shutter Fire 5000 Type RGS EI2 EI2 60 - VR60
A strong Fire shutter consisting of a synthetic material bonded to an inner core consisting of a high-performance insulation material. Tested at the University of Liège and has achieved a fire resistance of 79 min. Can be installed above suspended ceilings and meets the requirements for both fire protection and insulation.
Tested EI2 60-C. Tested and classified according to EN 13241.
CE marking in accordance with EN 16034
VR60 details
Tested EI2 60-C
Maximum size: 6000x 5000 mm.
Area: 22 m2
63 x 36 mm profiles consisting of a synthetic material bonded to an inner core of high performance insulation material.
Can run up to 5 times a day
The fire louver should only be used indoors and should be run a maximum of 5 times a day. We recommend an annual inspection or after 500 runs and a monthly test of the emergency system. Batteries should be changed every two years.
The 400V motors are equipped with a 24V emergency motor. In normal use, the blind is opened and closed with the 400V motor and the emergency motor (dead man's function). In an emergency, the emergency motor will close the blind automatically with power from the batteries in the control panel.
Always installed as surface mount
Blinds are always installed as surface-mounted blinds. It is assumed that there is a solid and suitable building component as a fastening base from the reveal and 220 mm in on both sides and throughout the entire height of the blind.
We recommend purchasing a tailor-made service agreement to ensure that the annual statutory inspection, operation and maintenance is carried out.
Fire shutter Requires annual statutory inspection
We recommend purchasing a tailor-made service agreement to ensure that the annual statutory inspection, operation and maintenance is carried out.
Technical specifications
At Alux, we believe that a good collaboration leads to a good solution. We are always ready to advise you throughout your project or help you if you have any questions about our solutions.
Contact our service team at alux@alux.dk for non-binding advice and quotes.
Downloads
Certificate
-
The 400V motors are equipped with a 24V emergency motor. In normal use, the blind opens and closes with the 400V motor and the emergency motor (dead man's function).
In an emergency, the emergency motor will close the blind automatically with power from the batteries in the control panel. The fire blind should only be used indoors and should be run a maximum of 5 times a day.
We recommend an annual inspection or after 500 runs and a monthly test of the emergency system. Batteries should be changed every two years.
-
63 x 36 mm profiles consisting of a synthetic material bonded to an inner core of high performance insulation material.
-
Width: 6,000 mm.
Height: 5,000 mm.
Area: 22 m2
-
123 x 72 mm galvanized steel with fire expanding material.
-
37 kg/m2
-
Supplied without guide rail and roller covers.
A cover box can be purchased at an additional cost.
-
Guide rails, brackets etc. are supplied galvanized.
The mat is available in light gray.
-
400V geared motor mounted in optional side. In the event of a power failure, an additional 24V DC motor ensures that the fire shutter closes.
-
ABA or ABDL system. Daily operation with key switch or code switch.
-
Blinds are always installed as surface-mounted blinds. It is assumed that there is a solid and suitable building component as a fastening base from the reveal and 220 mm in on both sides and throughout the entire height of the blind.
-
- Annual statutory inspection by a service company.
- Functional testing of engine, steering and safety equipment.
- Check suspension, fasteners and slats for damage.
- Tightening of moving parts.
- Clean guide rails and, if necessary, lubricate bearings and sliding brackets.
-
We recommend purchasing a tailor-made service agreement to ensure that the annual statutory inspection, operation and maintenance is carried out.
Related products
Fire shutter Fire 5000 Type RGC EI2 60
This Fire 5000 Fire shutter is an excellent solution for fire-resistant closure or partitioning of rooms. Partly thanks to its high fire resistance of 60 minutes, this Fire shutter is extremely suitable for situations where high fire resistance is required.
Fire shutter Fire 4000 Type RGS EW 60, EW 90 & EW120
This Fire 4000 Fire shutter is an excellent solution for fireproof closing or dividing rooms. This Fire shutter is highly suitable for everyday use and situations where low to medium fire resistance is required.
Fire Curtain Fire 5000 Type RGT EI2 60 & EI2 120
A heat-insulating fire protection that reduces heat radiation to a minimum. The temperature on the surface of the fire curtain can be kept lower than 140° for a minimum of 30 minutes. The compact and solid design of the fire curtain can be easily integrated into both ceilings and frames.