Safe 4000 Type 60 safety shutter
Type 60 is a sliding shutter with many design options. This sliding shutter is made with a 60 mm frame construction and is available with expanded metal, perforated sheet, wood or aluminum slats. Available with manual or motorized operation.
Can also be used indoors.
Downloads:
Sizes
Max: 2600x2600mm
Min: 300x300 mm
The frame profile is a 60x60mm system profile in aluminum or galvanized steel.
Screen cloth or expanded metal
If you choose a screen fabric as a filling, you get a view through the fabric and shield up to 80% of sunlight.
Expanded metal offers many options for solar shading with good airflow. The shading effect varies depending on the angle of the sun in the sky, but can shade up to 100%.
Aluminium slats or wooden slats
Slats in the shutters reflect or absorb the sun's rays so that the heat doesn't reach the glass and heat up the room. With slats in the shutters, you also have the option to control the amount of light by adjusting the distance between the slats.
Perforated sheets or glass
Sliding frames can also be made with other types of infills such as perforated sheets and silk-screened glass.
Alux sliding shutter inspiration
-
![]()
Danish Technological Institute
At Matematiktorvet at DTU Lyngby Campus, building 324 is covered with a Safe 4000 Type 40 sliding shutter with screen cloth on the south side of the building.
-
![]()
Housing association Kongestræde
Housing association Kongestræde has been delivered and installed Sun 4000 Type 60 sliding shutters, with specially colored plates.
-
![]()
Cortex Park in Odense
Housing association Cortex Park has been supplied and installed Sun 4000 Type 60 sliding shutters, with perforated plates.
-
![]()
Herningsholm Media House
At Herningsholm Erhvervsskole's new extension, we delivered and installed the Sun 4000 Type 60 sliding shutter with expanded metal infill.
-
![]()
Boulevardhuset Frederiksberg
The windows and dynamic shutters are made of Corten steel with a dark bronze color that interacts beautifully with the roof and facade cladding, which patinates and turns copper brown over time.
Technical specifications
At Alux, we believe that a good collaboration leads to a good solution. We are always ready to advise you throughout your project or help you if you have any questions about our solutions.
Contact our service team at alux@alux.dk for non-binding advice and quotes.
-
Max: 2600x2600mmMin: 300x300 mm
Max. dimensions may vary with different slat types.
-
The frame profile is a 60x60mm system profile in aluminum or galvanized steel.
-
The slide is made of extruded aluminum with the option of concealed mounting and an integrated motor.
Manually operated: 40x45mm
Motorized: 60x75mm -
The bottom rail is extruded aluminum and is available as a T-profile or L-profile.
Bottom rail guide bracket with built-in brush profile for silent operation and prevents "rattling" noises when exposed to wind.
-
The inlaid slats/fill can be supplied in several different material types such as
- Wooden slats
- Alula plates
- Expanded metal
- Perforated sheets
- Glass
-
For frame widths or heights above 1200 mm, an internal stiffening profile is installed to ensure correct stretching Fabric.
-
All visible aluminum parts are powder coated RAL 9010 as standard.
All RAL colors are available.
For smaller orders, a color surcharge may apply for colors other than those listed.
-
The system is delivered motorized with a 230V motor either as cable-controlled or remote-controlled. The power of the motor is adapted to the size and location of the individual product.
Motorization can be supplemented with solar and wind automation for automatic operation.
-
The installation can be wall-mounted or ceiling-mounted.
